LUXE
PROFESSIONAL VOLUME ADHESIVE
Luxe Volume Adhesive is designed for volume eyelash application however it can also be used for classics. With a 1-1.5 second set time, Luxe allows you to wrap handmade volume lash fans with ease.
Luxe Volume Adhesive performs in a wide humidity range of 30-80% and boasts incredible lash retention of up to 8 weeks, which means your lash sets will remain attached until the natural lash sheds on it’s own.
FROM $28.50
(for professional use only)
-
• 1-2 second set time so you have enough time to wrap lash fans or adjust lash direction.
• Designed to perform between 30-80% humidity and 68-73° F
• Up to 8 weeks lash retention
• Little to no fumes
• Thin, water-like consistency and self leveling
-
Natural lashes should always be thoroughly cleaned and rinsed prior to lash extension application.
Prior to opening Mega Volume adhesive, shake the bottle for 30 seconds to ensure contents are fully mixed.
Remove the cap and hold the bottle upside down. Squeeze a small drop of adhesive onto a jade/crystal stone or glue flower.
Return to original position, gently squeeze to remove any excess adhesive in the nozzle and replace the cap.
FOR HANDMADE VOLUME FANS: with the fan in a vertical position, dip 1-2mm of the stem into the center of the adhesive drop and pull out slowly. Press or wiggle the stem into the lash and release. Alternatively, you can dip 1-2mm of the stem into the adhesive and pull out quickly to pick up a micro drop.
FOR PREMADE OR PROMADE VOLUME FANS: with the fan in a vertical position, dip 1-2mm of the stem into the center of the adhesive drop and pull out quickly to pick up a micro drop. Press the stem into the lash and release.
FOR CLASSIC APPLICATION: with the extension in a vertical position, dip 1/3-1/2 of the into the center of the adhesive drop and pull out quickly to pick up a micro drop. Press the extension into the lash, hold for 1-2 seconds and release.
As you’re working, replace the drop of adhesive every 15-30 minutes so it remains fresh (time depends on temperature and humidity within your workspace)
PRO TIP: Adhesive should always have a thin-water-like consistency. If it seems slightly thicker, it’s time to replace your drop.
-
Ethyl Cyano Acrylate, Poly(methyl methacrylate), Carbon Black
-
• Luxe Volume adhesive performs best in workspaces between temperatures of 68-73 degrees Fahrenheit. If temperature within your workspace is lower, it will increase the set time. If temperature within your workspace is higher, it will reduce the set time.
• Optimal humidity for Luxe Volume adhesive is between 30-80%, with a sweet spot of 43-50%
• Store Luxe Volume adhesive in a cool, dry area inside of an air-tight container with a packet of silica or dry rice . Do not refrigerate as moisture can get inside of the bottle and make the contents harden.
• Luxe has a shelf life of up to 6 months unopened. Unopened bottles should be stored within in an air tight container in the refrigerator. When ready to use, leave the bottle out for a minimum of 2 hours before opening.
• Once opened, it’s recommended to replace the bottle every 4 weeks to ensure the adhesive is fresh and performs its best.